Laser Cutting Service

-Cutting area: 40"x24"

-Max cutting thickness: 1/4" or 6mm

-$2/minute for machine time.

-$1/minute for file fixing or   modification.

-Files need to be in a vector format   that can be opened by Adobe   Illustrator.

-For the cutting line, please set it to   RGB pure red, and 0.001mm or 0.0001".

-We also do basic heat bending at $5   per bend.

CNC Milling Service

-Cutting area: 72"x96".

-Max material thickness: 5".

-$2.5/minute for machine time.

 (10 minutes minimum) 

-$1/minute for file fixing or   modification.

-We only take DXF or .ai files.

-The general cutting bit is 1/4"   (6.35mm) in diameter, so please keep   that in mind when designing your files.

 (Holes and inside corners need to be   greater than the bit.)

-We will do basic edge clean up.

 (Taking the parts out from the sheet,    and clean up the tabs.)

3D Printing Service

-We only do FDM 3D printing in ABS.

 (We can do PLA if the file doesn't   requite much support)

-Layer Thickness: 0.2mm

-We charge by printed weight including   support materials at $1.5 every 10g.
  (minimum charge per print $10)

-Build Volume: 205 × 255 × 225 mm
               (8″ x 10″ x8.8″)(XYZ)

-We only take .stl files.

-Infill % choices: 13%,20%,60%,80%